Bradley Powers

Associate Professor

Relevant Thesis-Based Degree Programs

 
 

Graduate Student Supervision

Master's Student Supervision

Theses completed in 2010 or later are listed below. Please note that there is a 6-12 month delay to add the latest theses.

Absence of ergonomic safety standards and the need for load path redundancies in manual theatrical counterweight rigging (2023)

No abstract available.

House of performance: an indoor-outdoor venue for amplified live music (2022)

This thesis project is a conceptual design for a small performance venue which is specifically made for amplified live music: the House of Performance (HOP). Taking inspiration from the performance-based cultures of the Grateful Dead, Raves, and Burning Man, the project includes conceptual drawings for architectural and structural building design, as well as for live production sound, lighting, video projection, staging and rigging systems.The HOP is designed to operate in both smaller indoor and larger outdoor configurations, able to change between them by opening or closing three large doors on the venue’s rear wall. Accessibility is a major priority, with the aim to exceed building code minimum requirements. It is to be an intimate space with minimal barriers between performers and their audience. It can accommodate a wide variety of productions and events with installed equipment, reducing the amount of touring and rental gear which must be used. The ability to put on outdoor productions helps to prioritize audience safety in the era of Covid-19.To guide the design development for the HOP, I have named the specific groups of users whose needs must be considered (Audience, Community, House crew, Industry and Performers) and principles to follow when making decisions (Experience, Access, Safety, Environment). To limit the project’s scope, I have chosen to follow the BC Architects Act (RSBC 1996 c 17) limits for buildings which are not designed by a qualified architect. For a single storey public assembly building, the maximum gross floor area is 275 m2 (2960 ft2) and the longest unsupported span is 9 m (29’–6”). The HOP has been designed to fit within these guidelines.

View record

Technical direction for Judith Thompson's "Lion in the Streets" (2019)

No abstract available.

Manual or Digital: A Study Comparing the Process of Three-Dimensional Scanning and Printing Theatre Properties to the Process of Creating Theatre Properties by Hand (2016)

This paper documents the process undertaken in researching the viability of the creation of three-dimensional (3D) printed props in lieu of handmade props, more specifically a handmade Italian Commedia dell'Arte mask for the character of Scaramuccia (Scaramouche). With the guidance from resident prop master, Lynn Burton, I was able to create two handmade papier mâché masks through the process of casting a negative of a plasticine mask and then papier mâchéing both that negative cast and the plasticine mask. Through the use of a NextEngine 3D Laser Scanner, a plethora of online resources, and trial and error work with a number of 3D software editing products (NextEngine ScanStudio, MeshLab, Autodesk Meshmixer, netfabb Basic, Autodesk Memento, 3D Studio Max Design, and MakePrintable.com), I have been able to create a 3D model of this mask, which I then attempted to print using the FlashForge Creator Pro 3D printer.

View record

 

Membership Status

Member of G+PS
View explanation of statuses

Program Affiliations

Academic Unit(s)

 

If this is your researcher profile you can log in to the Faculty & Staff portal to update your details and provide recruitment preferences.

 
 

Get key application advice, hear about the latest research opportunities and keep up with the latest news from UBC's graduate programs.