Doctor of Philosophy in Mechanical Engineering (PhD)

Overview

The thesis-based Doctor of Philosophy (Ph.D.) in Mechanical Engineering is an advanced research-based degree. The program offers students an opportunity to work at the highest level of research, under the supervision of a faculty member. Students complete their candidacy examination within 18 months and complete their doctoral dissertation research within three to four years. It is normal department practice to initially register students in the M.A.Sc. program, and to transfer them to the Ph.D. program upon completion of the M.A.Sc. (or earlier if recommended by the supervising faculty member).

Students taking their Ph.D. in Mechanical Engineering can select one of the below research areas:

  • Applied Solid Mechanics
  • Biomechanics and Medical Devices
  • Computational Engineering
  • Energy & Environment
  • Fluid Mechanics
  • Manufacturing Automation & Robotics
  • Mechatronics & Instrumentation
  • Naval Architecture & Marine Engineering

What makes the program unique?

With eight Research Chairs and almost every research faculty member holding a least one NSERC grant, we have one of the most active research programs in Canada and consistently produce industry and academic leaders.

UBC is ranked in the World’s Top 40 Universities by the Shanghai Jiao Tong University Institute of Higher Education and our Mechanical Engineering professors are recognized nationally and inter­nationally as leaders in their fields.

We offer affordable, competitive tuition fees and extend a number of scholarships, awards, top-ups to external awards, entrance fellowships, Research Assistantships (RA's) and Teaching Assistantships (TA's) to our students.

 

Apply Now

If you don't have a UBC Campus-Wide Login (CWL) please create an account first.
 

Program Enquiries

Still have questions after reviewing this page thoroughly?
Contact the program

Admission Information & Requirements

1) Check Eligibility

Minimum Academic Requirements

The Faculty of Graduate and Postdoctoral Studies establishes the minimum admission requirements common to all applicants, usually a minimum overall average in the B+ range (76% at UBC). The graduate program that you are applying to may have additional requirements. Please review the specific requirements for applicants with credentials from institutions in:

Each program may set higher academic minimum requirements. Please review the program website carefully to understand the program requirements. Meeting the minimum requirements does not guarantee admission as it is a competitive process.

English Language Test

Applicants from a university outside Canada in which English is not the primary language of instruction must provide results of an English language proficiency examination as part of their application. Tests must have been taken within the last 24 months at the time of submission of your application.

Minimum requirements for the two most common English language proficiency tests to apply to this program are listed below:

TOEFL: Test of English as a Foreign Language - internet-based

Overall score requirement: 93

Reading

22

Writing

21

Speaking

21

Listening

22

IELTS: International English Language Testing System

Overall score requirement: 6.5

Reading

6.0

Writing

6.0

Speaking

6.0

Listening

6.0

Other Test Scores

Some programs require additional test scores such as the Graduate Record Examination (GRE) or the Graduate Management Test (GMAT). The requirements for this program are:

The GRE is optional.

2) Meet Deadlines

January 2025 Intake

Application Open Date
01 June 2024
Canadian Applicants
Application Deadline: 01 September 2024
Transcript Deadline: 15 September 2024
Referee Deadline: 15 September 2024
International Applicants
Application Deadline: 01 September 2024
Transcript Deadline: 15 September 2024
Referee Deadline: 15 September 2024

September 2025 Intake

Application Open Date
15 September 2024
Canadian Applicants
Application Deadline: 15 February 2025
Transcript Deadline: 01 March 2025
Referee Deadline: 01 March 2025
International Applicants
Application Deadline: 15 February 2025
Transcript Deadline: 01 March 2025
Referee Deadline: 01 March 2025

3) Prepare Application

Transcripts

All applicants have to submit transcripts from all past post-secondary study. Document submission requirements depend on whether your institution of study is within Canada or outside of Canada.

Letters of Reference

A minimum of three references are required for application to graduate programs at UBC. References should be requested from individuals who are prepared to provide a report on your academic ability and qualifications.

Statement of Interest

Many programs require a statement of interest, sometimes called a "statement of intent", "description of research interests" or something similar.

Supervision

Students in research-based programs usually require a faculty member to function as their thesis supervisor. Please follow the instructions provided by each program whether applicants should contact faculty members.

Instructions regarding thesis supervisor contact for Doctor of Philosophy in Mechanical Engineering (PhD)
Applicants should browse faculty profiles and indicate in their application who they are interested in working with. No commitment from a supervisor prior to applying is necessary, but contacting faculty members is encouraged.

Citizenship Verification

Permanent Residents of Canada must provide a clear photocopy of both sides of the Permanent Resident card.

4) Apply Online

All applicants must complete an online application form and pay the application fee to be considered for admission to UBC.

Tuition & Financial Support

Tuition

FeesCanadian Citizen / Permanent Resident / Refugee / DiplomatInternational
Application Fee$114.00$168.25
Tuition *
Installments per year33
Tuition per installment$1,838.57$3,230.06
Tuition per year
(plus annual increase, usually 2%-5%)
$5,515.71$9,690.18
Int. Tuition Award (ITA) per year (if eligible) $3,200.00 (-)
Other Fees and Costs
Student Fees (yearly)$1,116.60 (approx.)
Costs of livingEstimate your costs of living with our interactive tool in order to start developing a financial plan for your graduate studies.
* Regular, full-time tuition. For on-leave, extension, continuing or part time (if applicable) fees see UBC Calendar.
All fees for the year are subject to adjustment and UBC reserves the right to change any fees without notice at any time, including tuition and student fees. Tuition fees are reviewed annually by the UBC Board of Governors. In recent years, tuition increases have been 2% for continuing domestic students and between 2% and 5% for continuing international students. New students may see higher increases in tuition. Admitted students who defer their admission are subject to the potentially higher tuition fees for incoming students effective at the later program start date. In case of a discrepancy between this webpage and the UBC Calendar, the UBC Calendar entry will be held to be correct.

Financial Support

Applicants to UBC have access to a variety of funding options, including merit-based (i.e. based on your academic performance) and need-based (i.e. based on your financial situation) opportunities.

Program Funding Packages

From September 2024 all full-time students in UBC-Vancouver PhD programs will be provided with a funding package of at least $24,000 for each of the first four years of their PhD. The funding package may consist of any combination of internal or external awards, teaching-related work, research assistantships, and graduate academic assistantships. Please note that many graduate programs provide funding packages that are substantially greater than $24,000 per year. Please check with your prospective graduate program for specific details of the funding provided to its PhD students.

Average Funding
Based on the criteria outlined below, 58 students within this program were included in this study because they received funding through UBC in the form of teaching, research, academic assistantships or internal or external awards averaging $36,788.
  • 36 students received Teaching Assistantships. Average TA funding based on 36 students was $7,632.
  • 53 students received Research Assistantships. Average RA funding based on 53 students was $21,011.
  • 10 students received Academic Assistantships. Average AA funding based on 10 students was $960.
  • 58 students received internal awards. Average internal award funding based on 58 students was $11,183.
  • 3 students received external awards. Average external award funding based on 3 students was $28,889.

Study Period: Sep 2022 to Aug 2023 - average funding for full-time PhD students enrolled in three terms per academic year in this program across years 1-4, the period covered by UBC's Minimum Funding Guarantee. Averages might mask variability in sources and amounts of funding received by individual students. Beyond year 4, funding packages become even more individualized.
Review methodology
Scholarships & awards (merit-based funding)

All applicants are encouraged to review the awards listing to identify potential opportunities to fund their graduate education. The database lists merit-based scholarships and awards and allows for filtering by various criteria, such as domestic vs. international or degree level.

Graduate Research Assistantships (GRA)

Many professors are able to provide Research Assistantships (GRA) from their research grants to support full-time graduate students studying under their supervision. The duties constitute part of the student's graduate degree requirements. A Graduate Research Assistantship is considered a form of fellowship for a period of graduate study and is therefore not covered by a collective agreement. Stipends vary widely, and are dependent on the field of study and the type of research grant from which the assistantship is being funded.

Graduate Teaching Assistantships (GTA)

Graduate programs may have Teaching Assistantships available for registered full-time graduate students. Full teaching assistantships involve 12 hours work per week in preparation, lecturing, or laboratory instruction although many graduate programs offer partial TA appointments at less than 12 hours per week. Teaching assistantship rates are set by collective bargaining between the University and the Teaching Assistants' Union.

Graduate Academic Assistantships (GAA)

Academic Assistantships are employment opportunities to perform work that is relevant to the university or to an individual faculty member, but not to support the student’s graduate research and thesis. Wages are considered regular earnings and when paid monthly, include vacation pay.

Financial aid (need-based funding)

Canadian and US applicants may qualify for governmental loans to finance their studies. Please review eligibility and types of loans.

All students may be able to access private sector or bank loans.

Foreign government scholarships

Many foreign governments provide support to their citizens in pursuing education abroad. International applicants should check the various governmental resources in their home country, such as the Department of Education, for available scholarships.

Working while studying

The possibility to pursue work to supplement income may depend on the demands the program has on students. It should be carefully weighed if work leads to prolonged program durations or whether work placements can be meaningfully embedded into a program.

International students enrolled as full-time students with a valid study permit can work on campus for unlimited hours and work off-campus for no more than 20 hours a week.

A good starting point to explore student jobs is the UBC Work Learn program or a Co-Op placement.

Tax credits and RRSP withdrawals

Students with taxable income in Canada may be able to claim federal or provincial tax credits.

Canadian residents with RRSP accounts may be able to use the Lifelong Learning Plan (LLP) which allows students to withdraw amounts from their registered retirement savings plan (RRSPs) to finance full-time training or education for themselves or their partner.

Please review Filing taxes in Canada on the student services website for more information.

Cost Estimator

Applicants have access to the cost estimator to develop a financial plan that takes into account various income sources and expenses.

Career Outcomes

87 students graduated between 2005 and 2013. Of these, career information was obtained for 78 alumni (based on research conducted between Feb-May 2016):


RI (Research-Intensive) Faculty: typically tenure-track faculty positions (equivalent of the North American Assistant Professor, Associate Professor, and Professor positions) in PhD-granting institutions
TI (Teaching-Intensive) Faculty: typically full-time faculty positions in colleges or in institutions not granting PhDs, and teaching faculty at PhD-granting institutions
Term Faculty: faculty in term appointments (e.g. sessional lecturers, visiting assistant professors, etc.)
Sample Employers in Higher Education
University of British Columbia (4)
King Saud University (2)
University of Saskatchewan (2)
University of Adelaide
UNIKA Atma Jaya
University of Ontario Institute of Technology
University of Tehran
Abu Dhabi University
University of Michigan - Ann Arbor
Ohio University
Sample Employers Outside Higher Education
Pratt & Whitney Canada (3)
Coanda Research and Development Corporation (3)
Westport Innovations (3)
FPInnovations (2)
Candu Energy Inc. (2)
BMT WBM
PARC Inc.
Paperra
Vanmok Innovative Engineering Solutions
WK Investment Network
Sample Job Titles Outside Higher Education
Senior Mechanical Engineer (4)
Project Engineer (2)
Scientist (2)
Manager (2)
Senior Piping Engineer (2)
Research Engineer (2)
Principal Scientist
Research Scientist
Business Development Manager
Director
PhD Career Outcome Survey
You may view the full report on career outcomes of UBC PhD graduates on outcomes.grad.ubc.ca.
Disclaimer
These data represent historical employment information and do not guarantee future employment prospects for graduates of this program. They are for informational purposes only. Data were collected through either alumni surveys or internet research.
Career Options

The graduates of the Ph.D. program find employment at academic institutions and in high-level research and development positions in industry and other institutions. Recent Ph.D. alumni have gone on to work as tenure-track professors in major Canadian and US universities. Others have been employed as research scientists, project managers and team leaders in high-tech startups or S&P 500 companies.

Enrolment, Duration & Other Stats

These statistics show data for the Doctor of Philosophy in Mechanical Engineering (PhD). Data are separated for each degree program combination. You may view data for other degree options in the respective program profile.

ENROLMENT DATA

 20232022202120202019
Applications1047411295119
Offers2530221828
New Registrations1320131317
Total Enrolment9898838480

Completion Rates & Times

This program has a graduation rate of 95% based on 60 students admitted between 2011 - 2014. Based on 35 graduations between 2020 - 2023 the minimum time to completion is 3.42 years and the maximum time is 6.83 years with an average of 5.39 years of study. All calculations exclude leave times.
Disclaimer
Admissions data refer to all UBC Vancouver applications, offers, new registrants for each registration year, May to April, e.g. data for 2022 refers to programs starting in 2022 Summer and 2022 Winter session, i.e. May 1, 2022 to April 30, 2023. Data on total enrolment reflects enrolment in Winter Session Term 1 and are based on snapshots taken on November 1 of each registration year. Program completion data are only provided for datasets comprised of more than 4 individuals. Graduation rates exclude students who transfer out of their programs. Rates and times of completion depend on a number of variables (e.g. curriculum requirements, student funding), some of which may have changed in recent years for some programs.

Research Supervisors

Supervision

Students in research-based programs usually require a faculty member to function as their thesis supervisor. Please follow the instructions provided by each program whether applicants should contact faculty members.

Instructions regarding thesis supervisor contact for Doctor of Philosophy in Mechanical Engineering (PhD)
Applicants should browse faculty profiles and indicate in their application who they are interested in working with. No commitment from a supervisor prior to applying is necessary, but contacting faculty members is encouraged.
 
Advice and insights from UBC Faculty on reaching out to supervisors

These videos contain some general advice from faculty across UBC on finding and reaching out to a supervisor. They are not program specific.

 

This list shows faculty members with full supervisory privileges who are affiliated with this program. It is not a comprehensive list of all potential supervisors as faculty from other programs or faculty members without full supervisory privileges can request approvals to supervise graduate students in this program.

  • Altintas, Yusuf (Virtual Machining, Computer Control of Manufacturing Systems, CAD/CAM, CNC Design, High Speed Feed Drive Control, Real Time Interpolation and Trajectory Generation for Machine Tools, Adaptive Control, Sensor Fused Intelligent Machining, Metal Cutting Mechanics, Chatter Vibrations in Machining, Piezo -Actuator Based Precision Machining, High Speed Milling, Optimal Machining of Aerospace Parts, Dies and Molds, Automation, Precision Engineering, Electro Mechanical Systems, Modeling and Analysis of Machining Processes, Mechanics, dynamics and control of micro-machining operations)
  • Bacca, Mattia (Mechanical engineering; Medical and biomedical engineering; Solid Mechanics; Biophysics; Soft materials; Fracture Mechanics and Adhesion)
  • Bushe, William Kendal (Numerical modelling and mechanical characterisation; Automotive combustion and fuel engineering (including alternative and renewable fuels); Hypersonic propulsion and hypersonic aerodynamics; Aerospace engineering, n.e.c.; Numerical Simulation of Turbulent Combustion; Reacting Flows; Energy Conversion Systems; clean energy)
  • Chiao, Mu (MEMS, Micro Sensors, Micro Actuators, BioMEMS, Nanotechnology, Bioengineering, Electronic Packaging, Nanoscience, Energy sources for micro-electro-mechanical systems)
  • Clare, Adam (Manufacturing technologies and approaches for a sustainable future; Additive manufacturing (materials, processes, design and application); Electrical discharge machining, electrolyte jet machining, electron beam and laser processes; Stochastics in engineering design and manufacture; Machine design and build; Manufacturing for high value and high integrity applications (aerospace, biomedical, tool & nuclear))
  • Elfring, Gwynn (Theoretical Fluid Mechanics, Complex Fluids, Cell Biomechanics, Capillary Phenomena, Applied Mathematics )
  • Feng, Steve (Mechanical engineering; Modelization and Simulation; Software (Tools); Machining and Assembling; Milling; Prototyping; 3D Laser Scanning; 3D Printing; Computer-Aided Design and Manufacturing (CAD/CAM); Geometric Modeling; Machining Simulation; Multi-Axis CNC Machining)
  • Frigaard, Ian (Fluid mechanics (visco-plastic fluids))
  • Giang, Amanda (Atmospheric sciences; Mechanical engineering; Natural environment sciences; Atmospheric Pollutants; Chemical Pollutants; Climate Changes and Impacts; Public Policies; Social and Cultural Factors of Environmental Protection)
  • Grecov, Dana (Rheology, Rheometry, Non-Newtonian Fluid Mechanics, Computational Fluid Mechanics, Liquid Crystals, Biolubricants, Lubricants, Journal Bearings, Multi-Phase Flow, Synovial Joints, Synovial Fluid, Arthrithis, Liquid crystals and nanomaterials, Biofluid Mechanics)
  • Green, Sheldon (Fluid Mechanics; Biological and Biochemical Mechanisms; building ventilation; railroads; papermaking)
  • Hodgson, Antony (Image guided surgery systems; computer assisted orthopaedic surgery; Medical Imaging; surgical navigation; orthopaedics; biomechanics; surgical robots; Image Processing; Machine Learning)
  • Jaiman, Rajeev (Mechanical engineering; Bluff-body flows and flow-induced vibration; Computational methods and numerical analysis; Data-driven computing; Flow control and drag reduction; Fluid-structure interaction; Model order reduction; Multiphase Flows)
  • Jelovica, Jasmin (Civil engineering; Mechanical engineering; Finite element analysis; Machine Learning; Metals and Alloys; Production and Process Optimization; Sandwich structures; Solid Mechanics; Stress Analysis; Structural optimization; Ultimate, fatigue and impact strength; Welding and joining of metals)
  • Jin, Xiaoliang (Mechanical engineering; Manufacturing Processes; Solid Mechanics; Machining Mechanics and Dynamics; Manufacturing Processes for Advanced Materials; Material Characterization; Surface Integrity; Vibration Assisted Machining)
  • Kirchen, Patrick (Thermochemical Energy Conversion, Combustion, Internal Combustion Engines, Ion Transport Membranes, Emissions, Fuel Injection )
  • Liao-McPherson, Dominic (Mechanical engineering; Predictive and Constrained Control; Multi-agent Systems; algorithmic game theory; Real-time, Embedded, and Distributed Optimization; Energy Systems, Manufacturing, and Robotics)
  • Ma, Hongshen (Microfluidics; Instrumentation; Cell Sorting; Cell Biomechanics; Circulating Tumor Cells; Malaria and Red Blood Cell Deformability; Single Cell Technologies; Cell Migration and Chemotaxis)
  • Mérida, Walter (Clean energy, Electrochemical energy conversion, Thermodynamics, Low carbon fuels, Fuel cells and hydrogen)
  • Nagamune, Ryozo (Systems control and automation; Manufacturing engineering; control engineering; data-driven modeling and control; robust and linear parameter-varying control; modeling and control of floating offshore wind turbines and wind farms; modeling and control of metal additive manufacturing processes; modeling and control of solar themal systems; modeling and control of automotive engines; optimization)
  • Ollivier-Gooch, Carl (Aerodynamics (except hypersonic aerodynamics); Computational fluid mechanics; Algorithm Development for Computational Fluid Dynamics; Applied Aerodynamics; Numerical analysis; Unstructured Mesh Generation; Error and Stability Analysis for Unstructured Mesh Methods; Computer Sciences and Mathematical Tools; Fluid mechanics)
  • Olson, James (Application of Physics and Fluid Mechanics to Problems Associated with the Pulp and Paper Industry, Mechanical Energy Reduction in Mechanical Pulping)
  • Oxland, Thomas (Spinal Cord Injury, Aging Spine, Orthopaedic Implants)
  • Phani, Srikantha (Dynamics of multiscale materials, structures and devices, Applied Mechanics, Micromechanics)

Pages

Open Research Positions

This list of possible research projects is non-exhaustive. It only shows positions that are specifically advertised in the G+PS website.

Doctoral Citations

A doctoral citation summarizes the nature of the independent research, provides a high-level overview of the study, states the significance of the work and says who will benefit from the findings in clear, non-specialized language, so that members of a lay audience will understand it.
Year Citation
2024 Dr. Pourzahedi's research delved into the dynamics of gas propagation inside complex fluids, offering strategies to manipulate gas presence inside such media. Relevant to mitigating greenhouse gas emissions from tailings ponds, understanding gas behavior in these fluids holds significant importance for sustainability and environmental preservation.
2024 Dr. Rad's research centered on enhancing devices that provide a tactile sense of simulated environments. Her work elevated the quality of interactions and perception in dynamic environments. Her findings hold promise for critical fields like medical training and telesurgery, where interaction precision is vital for patient safety.
2024 Dr. Gupta investigated the rheology and flow dynamics of wormlike micellar gels. His experiments revealed previously unknown complex features in the flow of such fluids and will aid the synthesis, design and manipulation of similar soft matter.
2024 Dr. Tai developed a hybrid physics and data-driven method for spindle health monitoring. He combined digital spindle twins with a machine-learning method to make machine tools more intelligent in health diagnosis. These comparative studies assist machine tool manufacturers or spindle repair companies in increasing their maintenance efficiency.
2024 Dr. Shrestha studied the insertion of needles into soft solids, the injection of fluid through microneedles and the detection of diseases like sickle cell disease and beta-thalassemia. The findings can help optimize drug or vaccine delivery through microneedles, and can provide a low-cost automated tool to detect diseases in low-resource settings.
2024 Dr. Zandsalimy developed novel methods to improve the numerical stability and convergence rate of computational simulations. These cutting-edge tools are highly efficient and readily applicable to current industrial simulation software. His automated methods substantially reduce the computational resources required for diverse applications.
2024 Dr. Babaee studied the effects of cryogenic fluid spills on ship structure integrity, focusing on rapid cooling impacts on plates. Using theoretical models, the research showed even small spills cause significant stress, aiding in designing more resilient maritime vessels.
2024 Dr. Karimi developed a physics-based digital model of machining thin wall blades enabling the development of optimization algorithms that autonomously adjust cutting parameters. This approach ensures both stability and precision in the machining process. These advancements significantly enhance the efficiency of blade machining.
2024 Dr. Izadi delved into the issue of leakage within the oil and gas industry, which is becoming an increasingly pressing environmental concern. He led the way in developing risk-based strategies to tackle this issue and pointed towards more sophisticated solutions to effectively mitigate its environmental impact.
2024 Dr. Zhang studied the displacement flows in narrow eccentric annuli. Her research spans a wide range of methods including 2D model development, 3D simulations and lab-scale experiments. A systematic classification metric has been built and the main emphasis lies in understanding the dispersion behavior of such flows.

Pages

Further Information

Specialization

Fields of research in Mechanical Engineering include: acoustics; aerodynamics and fluid mechanics; automatic controls; robotics and industrial automation; energy conversion, combustion, thermodynamics and heat transfer; vibrations and space dynamics; solid mechanics; bioengineering and biomechanics; design and manufacturing processes; industrial engineering, fuel cells, micro-electromechanical systems, mechatronics, and CAD; and naval architecture.

Faculty Overview

Program Identifier

VGDPHD-P8

Classification

 

Apply Now

If you don't have a UBC Campus-Wide Login (CWL) please create an account first.
 

January 2025 Intake

Application Open Date
01 June 2024
Canadian Applicant Deadline
01 September 2024
International Applicant Deadline
01 September 2024

September 2025 Intake

Application Open Date
15 September 2024
Canadian Applicant Deadline
15 February 2025
International Applicant Deadline
15 February 2025
 
Supervisor Search
 

Departments/Programs may update graduate degree program details through the Faculty & Staff portal. To update contact details for application inquiries, please use this form.

Considering UBC for your graduate studies?

Here, you can choose from more than 300 graduate degree program options and 2000+ research supervisors. You can even design your own program.